Tannoy Precision 6 Speaker "amp active subwoofer amplifier" Questions

...subwoofer amp If it came actively powered and permanently connected but you do not want to use the supplied amplifier, then you need to disassemble the subwoofer cabinet and disconnect the amplifier ...

...active subs usually provide for one or both "low level" and "high level" inputs. Low level signals are usually carried by shielded coaxial cables and have RCA type plugs on the end. The low level is ...

Active EQ between the receiver and the 901's amp channels. My receiver controls everything and just drives the Center and Surrounds. You would probably just get a nice 2-channel amplier for the 901's.

...active, according to the movie soundtrack, but no matter how high you turn up the volume, it will only make a sound barely above a whisper. I had the amplifier replaced a few years back, but at that ...

Active Equalizer - between the line level source and the power amp. Conventional speakers can probably run off the receiver's amplifiers since they don't/can't/must not have the Bose Active EQ in line

active EQ that matches the series of your speakers. I use a Yamaha mx-830 power amp & cx-830 pre amp 170 wpc They (Bose) claim that they're unlimited power handling, But if you use a amplifier with to

Active EQ between the receiver and the 901's amp channels. My receiver controls everything and just drives the Center and Surrounds. You would probably just get a nice 2-channel amplier for the 901's.

Active EQ between the receiver and the 901's amp channels. My receiver controls everything and just drives the Center and Surrounds. You would probably just get a nice 2-channel amplier for the 901's.

Active EQ between the receiver and the 901's amp channels. My receiver controls everything and just drives the Center and Surrounds. You would probably just get a nice 2-channel amplier for the 901's.

...active means the speakers (or sub) driven by built-in amplifier, so the dvd delivers a low signal to the speakers amp and they amplify the sound for the speakers. passive means the amplifier is built ...