Astar LTV-20PW 20 in. EDTV-Ready LCD Television "hdmi board tv burned" Questions

...to my cable box with an HDMI cable into the HDMI 1 input. I get audio but no video. Is this a power supply issue? No,It ur tv have a burn dead LCD inverter board must change to get picture

A LIGHTNING STRIKE CLOSE BY ABOUT 100 FT AWAY BURNED OUT THE HDMI 1 AND 2 BOARD ON MY LG 47LD520 TV, HOW MUCH WOULD IT COST TO REPLACE THESE BOARDS?? i DO NOT HAVE CABLE

...board that has hdmi ports and the tv still has high power coming out of cable in put port and has burned out hdmi inport replaced the board that has the hdmi and cable in port. pluged tv in and same ...

...hdmi cord but nothing works. If burned pixels why does it go away after tv gets warmed up? This problems u have is useally causes by the board,that call the T-CON decoders board.This T-CON decoders ...

hdmi cord to litteraly blow out and caused sparking and burning, i looked inside and found the control main board was al sorts of burned and bad as well as a small burn mark on my power board where it

hdmi processor on the main board of your TV is defective. Alot of times hdmi ports tend to burn so see if you smell a burnt smell near or around the hdmi ports. but before you do anything be sure sure

...board it's burn or not. second thing is your LTV-32HBG TV with one HDMI connection or two HDMI connection? I know more about these Astar TV because I have work for the Astar co as an electronic ...

hdmi 42 inch polaroid tv after watching for while the screen goes black. i have to shut off tv and turn it back on and then it will do it again any one no i had the same problem. i opened the panel in

...HDMI (from component) and still have the problem. This tv is only 2 years old, and it started doing it about 6 months ago, and seems to be getting worse. The only way might solved this problem,to ...

...to reset colors, pixel shifts/burn portections. changed the source to every componet/hdmi, have unplugged for over 30 mins. checked all connections, out of ideas please help need replaced y