Question about Maytag Refrigerators
...maytag fridge. I already replaced the control panel. MFI2568AES SOME FRIDGES HAVE A RESET BUTTON IN THE CONTROL BOARD OR ON THE CONTROL BOARD My Maytag fridge is on the lowest temperature setting and ...
...Maytag Plus 134A. I have replaced a burnt out light on the right side in the fridge, however it does not light up. I tried the freezer bulb which was working in the fridge and the bulb does not light ...
How do you reset the change filter light on the door? On newer Maytag fridges Press Options, then Water Filter, then Reset, and then Yes.
Question about Maytag Refrigerators
...MAYTAG fridge approx 5 years old. The freezer is working but the main fridge does not cool as well. The tech said I need a new jazz board. Will cost me USD 450/- If I re-set the damn thing. Will it ...
...maytag mfd2562kes This was a floor model and the control board pads were scratched pretty bad. So I replace both the pads and the board and also have put in a new Evap Fan motor. Everything is ok ...
I put a new filter how do I reset I have done some research and here are some steps to solve the problem: For Maytag and Jenn-Air refrigerators press and hold the lock and light buttons (lock and ...
Question about Maytag Refrigerators
...Maytag MTB2156DEB fridge died. Electricity is on, lights are on but nobody home, I.E., no cooling. my old fridge had a "reset" button which I found out after the repairman charged a bundle to press. ...
...fridge maytag mbf1956hes stopped working while the freezer continues to work. I tried to increase the number level on fridge to see if started again but it didn't. I also noticed that both ...
How do I reset the 'change water filter' light~the filter no# is UKF003 Hold the botton on each side of the light in , until they start flashing . On newer Maytag fridges Press Options, then Water ...
Question about Maytag Refrigerators
...Maytag Refrigerator Model 7MI2569VEM2? I have replace dthe main control board on my fridge. How do I reset it to turn on? Have you tried unplugging the unit and waiting for a time? Also, make sure ...
95 questions posted
Usually answered in minutes!
599 Questions
580 Questions
207 Questions
170 Questions
162 Questions