Samsung CLP 300 Laser Printer "replace worn dev unit" Questions

...gear has already worn out. The ITB unit is acting up - First try to remove and replace, sometimes just reseating the unit will fix it. If not or if the belt is damaged you'll have to replace the

...DEV main drive might have worn out with the fuser gear. youu may want to download the smart panel to check on error. ...

...difficult to turn smoothly and so the toner will not be evenly distributed. The only way to fix this is to replace the worn dev units although cleaning the contacts will help to preserve their

...Replace the yellow Dev unit. This will most likely eliminate this problem. They have a life span and I am replacing then on machines less than a year old on occasion. What is a worn K Dev Unit ...

...worn K Dev Unit. I have tried many different things to alleviate this problem, including calling tech support, but with no solution. Also, it is now saying that I have a MP E Paper Jam, but there is ...

...worn y and k dev unit. I hope to replace but have no idea where I can purchase these. Please advise if you know. Thankss Near Secunderabad , There is Paradise Restaurant beside it there is CTC , at ...

...sensor and fuser unit will cause black smears check the fuser unit rollers if worn replace the fuser unit assembly check that you don't have wrong toner fitted,clean dev. unit and fit fresh ...

...Worn K Dev Unit" means? Google seems to be failing me here. I did read a thread regarding the C1100N, but am unsure if that model is similar enough that I can apply that advice. ...

...replace the cleaning blade as this has worn. you can clean the drum unit cleaning blade it may only be toner stuck under the blade all you have to do is rotate the drum the opposite way of operation ...

...worn you will have to replace the opc drum.. you can also turn the drum at the edge down and see if there is toner dropping down or any paper dust.. this can cause the unit not to clean properly..if ...