Samsung CLP 300 Laser Printer "replace transfer belt error" Questions

...replace transfer belt" message /  red light combo came up.  After picking up a new transfer belt and a second used CLP-600 and transfering over the cartridges and transfer belt, the same ...

...replace or can i fix? HI, The Transfer Belt error is because it is not correctly installed or it is defective,if so it need replacing. You can Pull out of the Drum Unit, open front door and take out ...

Replace Transfer Belt" (if it says "Install Transfer Belt" it thinks the belt is NOT installed!)2. I painstakingly went thru every inch of changes I had made to the printer since last running it. 

...replace transfer belt On the transfer belt error the printer still "works" On the fuse overheat error the printer stops with red light. Switch off for some tome or restart sometimes helps. ...

transfer belt error. any ideas on how to solve this? it could be just that the imaging unit is not sitting correctly on it's tracks remove and also proceed and taking the other unit behind it and just

transfer belt errors I keep getting 2 error messages:"transfer belt error" & "lever unlocking error". I can'[t seem to clear them. I saw this posted somewhere on the internet and it worked for me. ...

...transfer belt error message I have a Samsung CLX-3160FN color laser printer. It is making a very LOUD noise when it pulls (& mangles paper). I have no paper jam, have replaced all toner colors, ...

...transfer belt unit and cannot be replaced on it's own. First try removing and refitting the transfer belt, making sure the electrical contacts are clean and undamaged. If that doesn't work, fit ...

...transfer belt needed to be replaced and I replaced it. But the message won't go away. try this: 1. Press # sign; then 1934 2. Press MENU 3. Arrow to Tech Mode (not User Mode); press OK 4. DataSetup; ...