Samsung CLP 300 Laser Printer "replace imaging unit reset" Questions

...replace imaging unit" will not appear on the display. How do you reset the imaging unit? Having the same problem with my CLP510, replaced the imaging unit, but am still unable to reset the counter. ...

...replace imaging unit But there was nothing wrong with the unit, is this a way for samsung to generate more income by adding a chip to the imaging unit, As it happens i have another printer and i ...

...on the unit that when you replace it it blows resetting the transfer counter. Sorry J you need to reprogram eprom on the image unit if you have electronics knowledge you can easy to fix your ...

...IMAGING UNIT, FUSER UNIT FOR SAMSUNG CLP 510 You can check the level of each item. 1. In ready mode press the Menu button on the control panel everal times until you see 'Setup 'on the bottom ...

...REPLACE IMAGING UNIT IN CLP PRINTER SERIES 320 If you are worried about opening the printer or welding, you can simply buy an easy reset chip from Amazon or eBay. No welding is required and the ...

...replace them. I replaced all the cartridges at once, turned the printer back on and received an ?Invalid Imaging Unit? error. I turned the printer off, returned the old cartridges, turned the printer ...

...unit but it continues to have the same issue. It says processing .... and then shuts itself off when it gets to hot. Can you help me? If you have the manual for the printer look up how to reset it. ...

I have just replaced the imaging unit in a CLP-315 and it is still telling me i have 9% life left, any suggestions? Reset the counter.

...replace Imageing unit. I have replaced both and I still am getting the errors. I have tried unplugging, restarting and shutting down but it will not reset. If I just leave the printer on it gets hot ...

...imaging unit but continue to receive intermittent replace messages. Also, just started getting replace toner messages even when the toner cartridges are new. Unable to use printer when these occur. ...