Samsung CLP 300 Laser Printer "lid" Questions

My printer indicate red(...) light in the power cycling. i heard a sound jamed with paper lift the lid see if any dbree from paper is stoping it.

I'm not sure what to do now? Load paper from the manual feed at the left side. You need to open the lid first

...get the fuser together again.... Eeks.... I got the label out of the fuser, but I can't put the "lid" back on the fuser--- not to mention - how do I put the fuser assembly back in the printer.

...the transfer belt and install the new one. Remember to lock the levers back into place. Close the lid. You are ready for

...awhile. Then I finally realized I was trying to close the toner cartridge door BEFORE I closed the lid above it. (The printer was close to a wall so I couldn't see the "open and close in this ...

...I am still having a black strip run down each printed page. Please help! You need to open the small lid on each toner cartridge (to reveal the drum cylinder) and check if the line mark appears on any ...

...and replaced the correct chips on each one. the red light comes on to replace the toner, I open the lid take out the toner that it is telling me give it a quick shake replace and the light will turn ...

...interlocks, electrical and signal connections are seated properly. 2. Front cover, back cover and lid are closed properly. 3. Power plug and USB cable are connected. 4. Printer is turned on with ...

The lables will not advance unless you hold down the lid tight, also we didn't use it for a while because of this problem and not when you hold the lid down no printing is on the lable. there's a ...

problem lifting cartridge lid on model dx7400 problem lifting cartridge lid on model dx7400 press top of lid to lift cover but no luck There's a small "latch" that holds the top of the lid "down". ...