Samsung CLP 300 Laser Printer "check toner life" Questions

...toner color? I am looking for something that will tell me when the different toners need to be replaced. How do you tell? The printer's LCD will tell you when to replace tones, you can also use the ...

...toner cartridge-K407 (CLT-K407S)" But I have just replaced the cartridge with a compatible cartridge few weeks ago and havent used it much so it should be almost full. And it was working after I ...

...toner lights are off, then the printer has an error that must be corrected. Check for a paper jam, an open cover, no paper in the tray (or not being picked up by the rollers), the waste toner ...

check Transfer Roller (open the duplexer door to see this - grey (black when new) foam roller about 25mm diameter purple plastic tabs on ends (1 may be black). This is critical to good quality prints,

...check if it is the course. by removing the toner block. pull the belt towards you it shall come out. item to take note on life span for replacement. 1. Fuser - 25K +/- 2. transfer belt - 25K +/- 3. ...

toner thing out and then push it back in and sometimes this works. It has become a pain in the rear. It is less than a year old, and don't want to have to replace it. Any suggestions? Hi, you may do a

check each toner cartridge to see if the rollers can be rotated. If its difficult to rotate a roller, then replace the cartridge. If you have a faulty cartridge you may see that the small white wheels

...check is much easier. pouring away the waste toner tank is only a temperary soloutions. It will course other issue in your printer. example dirty print out or double image. advice is to replace the ...

...toner - still no difference! Having The Same Problems, And Only After Four Months. As Much As It Would Cost For Troubleshooting And Cost Of Repair The Worlds Smallest So Called Laser Printer Turned ...

...Toner Life End. Took toner out. Shook it a little, re-inserted. It printed about 2 pages and display started showing Toner Life End. Checked the toner, it is full. Resetted the switch. Problem keeps ...