Amana ARS266ZBS Side by Side Refrigerator "replace control board" Questions

replace control board too? It's possible that the issue is with the control board and not just the control panel. Before replacing the control board, here are a few things you can check: Make sure the

...control module. -Remove and Replace the wire harness if faulty. -Inspect the main control board module and the display control module if faulty. PARTS THAT MAY NEED TO BE REPAIRED OR REPLACED: Main ...

...control board DA41-293A for Samsung RB193KASB Fridge/freezer? My fridge is not defrosting. I checked each component and they are all ok. The only thing left is the control board DA41-293A. Check out ...

replace the older boards they claim to) I recommend replacing the control board in your refrigerator with the exact control board part number printed on your board. We have no longer available control

...replace the control board again. Other issues: There could be other issues with your refrigerator that are preventing the code from being saved, such as a faulty user interface or a problem with the ...

...order to correct the issue unfortunately. I'm not sure what shorted out both your main control and your display control board, but you will need to replace your display control now. hope this helps

...the wires go), and plug them into the new control board.Plug refrigerator back in and test out.For more detailed instructions, and pictures click the link below.How to replace WR55X10942 control ...

...control board . You will need to replace the board , which is located behind the refrig , behind the 8 " X 10 " , small panel . The pt # is WR55X10942 . You do NOT need to replace the board on the ...

...control panel not lit and water/ice button does not work, but icemaker is making ice. Any ideas what could cause temp board to lose power? try to replace the original main pcb board maybe your board ...

...replace the control board. What does the control board have to do with the ice around the ice maker? Now a week later the ice and freezer are fine and there is no message in the control board, but ...