Question about HP LaserJet Office Equipment & Supplies
...can, otherwise you need a new formatter board. before buy a new formatter you can try to bake its chip, warming it until 280°C for 20-30 seconds (but cover plastic parts around). sorry for my ...
Question about HP LaserJet Office Equipment & Supplies
LaserJet P3005n Printer: mem test failure replace dim 0... Mem test failure replace dim 0 This means your formatter board is failing or has failed. This is a common problem with a large number of the ...
...New formatter I'm afraid, quite a common fault on these. Q7848-60002 is the part number. I have baked these boards before in an oven and this has cured some problems like this. Remove the battery ...
Formatter (CC370-60001) board causes the printer "to Freeze","Hang"or "Restart". I have repaired many of these printers, for this very problem by replacing this board. It may be possible to "bake" the
printer freezing up when i turn it on it just says 008mb****** and wont print anything when we try screen goes blank. and freezes again. Common issue with the P3005 series. Your formatter board is bad
Question about HP LaserJet Office Equipment & Supplies
...Took the Formatter card out, BAKE for 8 minutes at 350F, let it cool, put it back in and VOILA! Put the card fase up and make sure (with screws) it does not touch the pan you used to bake it. Good ...
Question about HP LaserJet Office Equipment & Supplies
Formatter (CC370-60001) board causes the printer "to Freeze","Hang"or "Restart". I have repaired many of these printers, for this very problem by replacing this board. It may be possible to "bake" the
Formatter (CC370-60001) board causes the printer "to Freeze","Hang"or "Restart". I have repaired many of these printers, for this very problem by replacing this board. It may be possible to "bake" the
Question about HP LaserJet Office Equipment & Supplies
...Bake the formatter board without the battery at 350 degrees for about 8 minutes. Cool it down to room temperature, resolder the battery, put the board back and try it again. ...
...aslo? Take out Formatter (main board) bake for 8 minutes at 350F,. let cool and put back in. Put the card face up in a cookie tray and use screws to make sure it doesn't touch the tray. Works ...
623 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions