...for strap configuration on bacc of seat,when i hook it up the sinch strap will not tighten or release You can download a PDF of the owner's manual here. It should have a diagram of the straps in
seat. Open the strap guard door on the rear of the bit of the seat that reclines (Item 3 on diagram http://www.maxi-cosi.com/media/producthandleidingen/maxicosi/PrioriFix.pdf). The shoulder straps can
is there any diagrams of how to get the car seat cover off the blasted straps - i have taken the seat adjuster out of the unit but the straps are still attached and i can't get the seat cover off. the
car seat belts i need a diagram for how to put the straps back on after washing the cover. looking dfor a diagram
...seat there is a strap connected to the seat (usually connected from the underneath of the seat) with a metal piece that the shoulder straps connect to. The problem here is that either a piece is ...
...diagram for the infant car seat. Trying to get straps back after cleaning seat cover Hi, You may download your Peg Perego Primo Viaggio manual from this LINK. I hope this works for you. Thanks for ...
...seat, start by threading the end of the harness strap down through the slot of the left side of the bottom (where the child's right hip would be). Under the pad/cover, thread it across the bottom ...
seat there is a diagram about using the latch, but it also shows the metal part that the straps hook into going through the black piece that is closest to the seat. There is a black plastic piece that
...diagram. HELP! go to the shop wher you bought your car seat from an ask if you can take a picture of the same one on your phone or digital camera then take it home and match up the staps.take more ...
strap) as well as the metal guide at the back of the seat. Lastly, replace the shoulder pad, buckle and thread it back into the side of the seat, and then put the little plastic thing back on. The key
213 questions posted
Usually answered in minutes!
65 Questions
28 Questions
29 Questions
