Amana DRS2660B Side by Side Refrigerator "bottom freezer door gasket" Questions

bottom freezer door becomes ajar. Possible that the magnetic lock is weak or that the gaskets are dirty that is not sealing the door when closed. Clean the freezer door gasket using good detergent and

...bottom of freezer ice is forming at the bottom of my freezer Short answer: Because it's cold. It's what freezers do. The long answer requires you to describe a bit more about what you've got and what ...

...freezer at bottom. ice keeps building up in freezer, then it doesn't get cold up top. If the ice build up is only on the back panel of the freezer then you have a defrost problem. Most likely a ...

...bottom freezer/freezer door pops open Kenmore model 795.75202401 is a refrigerator with a bottom freezer. It's about 3 year's old. The freezer is totally cleaned out. When you shut the frig door, air ...

...door gaskets on freezer and refrigerator door not inflated and do not provide a tight seal allowing mold to form on inside of refrigerator doors where condensation collects. you might need new door ...

...bottom of my freezer door Condensation that wasnt present previously usually indicates a warm air leak into the cabinet. Check the freezer door gasket at the bottom for any malformations, rips, tears ...

...whirlpool freezer on bottom fridge on 03/02/2010. There is a buildup of ice on top part of door and on inner upper part by light in the freezer your door gasket isnt set right call for warranty ...

...freezer door gasket to be sure no food or ice is built up on it and that the mating surface is clean. Check that the door is closing parallel to the mating surface. A misalignment would make it hard ...

freezer and it is 0. The refrig on the bottom is 60+. It is a small 3.5 cf. with a small freezer on the top. Help!! thanks check the eoor gasket it may need to be replaced. The door may be out of line

...frosting before? I have this exact problem...was there a solution? Frost is causing bottom freezer door not to work, when I remove the frost, the light comes on. The gasket looks fine. Any