TruTech PLV1615T 15 in. LCD Television "set cable tv" Questions

cable box or other set top box and not the TV. It's known to happen with Samsung cable boxes from Cablevision. First try resetting the TV and set top box by unplugging both. Remove the HDMI cable from

...Cable Co says their box set properly and is due to a TV setting, but thought I tried them all. Both the TV and the Cable box have Aspect(height/width) settings. You must confirme the setting on the ...

set to the following: 16:9 1080i 480i 7. If you see additional HDMI settings as the forth item your TV and cable box are communicating across it, if not try unplugging both the TV and cable box and/or

...tv on tv input and try 3 . If still not working . Go to tv menu and find set to cable and do auto scan . When done try 3 again . be sure cable bos swith on back is set to 3 and not 4. Hope this

...set of cables from your cable box or wall outlet into the tv. 99% of the time this happens because the cable is loose or degraded and needs to be replaced. Be sure that the correct cables are in the ...

...set up for cable do you have a HD cable box or reg?..HD box you need the cable w/ 3 wires red/blu/green........reg just need the coaxial cable...lets start with the HD plug cables from (out) the box ...

cable from wall to set top box, then rca cables output of set top box , then to input to tv.-tried av button on tv showing av1 av2 and av3 but still no picture only static. Does the set top box and tv

...cable set box set to certain channel I lose audio on certain channel when selected and lose audio after that point on all channels until I turn off cable set box and tv. I have had the cable box ...

...cable set for Audio). S-video (a single round connector and separate Red and White audio cables). Composite (Yellow video cable plus Red and White audio cables, usually sold as a single set). RF out ...

...set to read the channels. I have cable but no cable box. Have tried to program it for over 3 hours. I've tried it using ch.3 and ch.4. through the remote. After I scan the channels, it tells me none ...