...close back door; need help my brother 7820 continues to not print with the messgge :back door is open and it isnt. Also the printing keeps folding up inside and jamming the drum as well first check ...
...fuser. Careful: It can get hot back there, also if there's a jam remove it from the back with both hands (to avoid tearing). If it's telling you to close this when it's already closed try ...
Question about Brother MFC Office Equipment & Supplies
...Close the back Cover. That is what my printer is saying and the back cover is closed. What do I do? Hi there, Do the following steps to resolve the problem - 1. Open the back cover 2. Pull the flap ...
Question about Brother MFC Office Equipment & Supplies
...fuser gear has broken. look for your exit rollers. they're right where your paper exits the machine. while watching them closely, open door, then close so that machine goes through its little warmup. ...
Question about Brother MFC Office Equipment & Supplies
close the door and power up. The machine should notice either the toner or the front door is not in place. Now open the door and place the toner. This might solve the problem. You can also try to soft
Question about Brother MFC Office Equipment & Supplies
...fuser cover back up and closed the back door and my printer works. THANK-YOU thank-you! thank-you a zillion. (P.S. I tried to attach a photo but had problems with that. . . ) I went to brother typed ...
close cover. The mentioned "two blue tabs" are the release point of the fuser upper roller that you toggle to move the roller up or release the downward pressure from the bottom roller. These are used
Question about Brother MFC Office Equipment & Supplies
...close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor or sensor lever. Printers & ...
fuser door open? how do i close fuser door? Try fuser door should be in the back. If it is close, it could be a door sensor issue. Also make sure that the fuser is in correctly.
fuser door is closed. I want to fix the problem that is causing the "fuser door open" error message. Thanks! Adam Look at the fuser door -- there is a "finger" that sticks out, and connects,
241 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions