Vizio GV42L 42 in. LCD Television "search button tv remote" Questions

...search button.press and release the tv button on the remote.enter the code found on the remote chart that is pertaining to your tv by entering it on the remote manually. aim the remote on the tv push ...

...SEARCH button until the LED light is RED 3.Press the TV button on the Remote 4. Keeping the remote pointed at the TV push the ON/OFF button until your TV turns OFF 5. When the TV turns OFF press the ...

...SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH Button. 3. Press and release the TV button. (The INDICATOR LIGHT will blink, then remain lit.) 4. Enter the code using the ...

...search with the TV on and let it run until it shut the TV off. Steps I took, press and hold the setup key - then release, press and release the TV button, press and release the power button, after TV ...

...search: 1. Press the tv and sel buttons until the IO button turns red. 2. Press channel up or down until the tv turns off and the press the tv button to lock in the code. Ps: Be pattient when ...

...SEARCH/SETUP button on the remote until the INDICATOR LIGHT lights, then release. 3. Press and release the button for the device you are programming (TV, VCR, DVD, etc.). For AUX, press AUX then the ...

...TV button on the lower right (not the upper right) to tell the remote to control the TV. The upper buttons are the Input Selector buttons. The lower buttons are the Device Control Selector buttons. I ...

...search for the tv code...follow that and you should have it. remember that the tv button only controls the tv,,cable button only controls cable box,,,dvd button only controls dvd player...and so on.. ...

...search feature for tv codes. 1)Press and hold both the "TV" button and "OK" button on your Uverse silver remote simultaneously.2)Release and lights on remote flash3)Type 9-2-2 on remote4)press and ...

...TV menu and channel search buttons near any front AV inputs. Not all TVs have this, but our old 27" CRT (built ~1990) had this option. You could launch a full scan and then edit the channel list with ...