Vizio GV42L 42 in. LCD Television "enough input message" Questions

...input might help. Or if you are using an antenna to get your tv, then maybe your antenna is not powerful enough. The new digital signal is weaker than the analog, so antennas that once worked might ...

...enough signal, if you have poor signal, you will get pixels(as oppesed to snowy picture on CRT televisions) make sure all plugs are plugged in correct, and try diff inputs from DirecTV to the Tv to ...

...enough, I figured out that if I use Input 5 (Video5 - YPbPr2) I can get a picture, but truncated on the sides -- even in the wide screen mode for most programs and when viewing the cable guide menu. ...

...input coming from the HD/DVR unit. Checked into some support sites and found that this problem seems to be fairly common when the screen is used with a computer, and can be adjusted through the ...

...not as good as it used to be, as is mine. The cure for me was to dig out an old signal booster and fit that on to the RF input i.e. between the aerial and the TV, simple enough job. and problem

...enough to display OK. I tried to play around with resolutions and as soon as I switched to another res, the TV showed a black screen with a message "signal is not compatible with this input". The ...

...input. Oh you must be connecting more than one television to the same satellite receiver. When that is the case tv #2 usually has to be set on a different channel and the satellite tv company tells ...

...INPUT button once on your SAMSUNG remote control once. This is the button in the top-right corner of your remote control. B. If you still cannot see the installation / setup screen, press the MENU or ...

input source on your TV. If you are using a 'co-ax' connection (standard aerial cable) you will have to select this manually from the remote. If you are using a SCART connection, all you need to do is

...enough near the input to the cable connector on the back of the TV, it would fix the problem for a while. But this no longer works. I suspect a bad connection on the main board, probably at the cable ...