...set my defaults to black only and this is svaing me big time on the colour cost. I'm not sure about this pay-per-page agreement, I'll have to see if it is available in Canada. Anyways, thanks for the ...
Question about HP Office Equipment & Supplies
Cartridges are set to default quality. I just replaced the ink cartridge. Changed ink cartridge as no printing came out at all. After puting in new cartridge, I keep getting message: Alignment failed.
...cartridges which cost more, but have more ink. Also check your printing preferences to see what your quality setting is. Draft quality is fine for most text and saves alot of ink, Normal or High is ...
Question about Xerox Phaser Office Equipment & Supplies
...QUALITY submenu. EconoMode is turned off by default. In the embedded Web server, open the Settings tab and select the Configure Device option. Navigate to the Print Quality submenu. In the HP Printer ...
Question about Xerox Phaser Office Equipment & Supplies
When I try to print a photo, it doesn't use the photo ink cartridge, but defaults to the regular color ink cartridge. Where do I tell it to choose photo ink? Check into the PRINT settings, available ...
Question about Xerox Phaser Office Equipment & Supplies
Default Quality" under "Copy Setup" from the HP3030 menu to "Photo" from "Test". That's a hardware setting on the HP 3030: Menu/Enter > Copy Setup > Default Quality > Photo Hope this helps. Terry Dear
Question about Xerox Phaser Office Equipment & Supplies
...quality. all pictures look almost faded. Recently installed printer. Not sure if more software is needed. Using default settings but the print out qualities are very poor. please clean your printer ...
Question about Xerox Phaser Office Equipment & Supplies
...default setting for printing set to "Fast". To alter this setting: 1. Click on the Start button on the bottom left corner of your task bar. 2. Click Settings. 3. Click Printers and Faxes. 4. ...
...default settings had changed. I had to go in and be sure the media type was set for Polyester (not Paper) and that the EP1 setting was at 10. This cleared it up. It seems to readjust its own settings ...
...default in the printer driver default printing settings. Unfortunately I've never seen a colour laser be able to ignore it's color cartridges before, you may be forced to replace that empty
210 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
152 Questions
147 Questions
