Question about Xerox Phaser Office Equipment & Supplies
...black ink loader failure) Features on the bottom of genuine Xerox ink sticks actuate the Ink Out Sensor located at the forward end of each ink channel of the Ink Loader. The sensor indicates the ...
...black ink, but the error is still there. Any solutions. When you service a Phaser 8500 or 8550 printer for: · a persistent Ink Out message · 9,035.43 Cyan Ink Stick Count Fault · 9,036.44 Magenta Ink ...
black ink stick. But, look in where your ink is loaded. One or maybe more than one stick is stuck and not advancing down in the ink loader. Look for a broken ink, one that is twisted or otherwise just
Question about Xerox Phaser Office Equipment & Supplies
Black Ink Sticks. Initial Actions • Check that the Ink Sticks are genuine Xerox. • Check for obstructions in the Ink Wells. • Check the Ink Loader data (P/J0150) and power (P/J5) connections. • Verify
Question about Xerox Phaser Office Equipment & Supplies
...so we only need/use black ink? Only loading black ink and printing monochrome only is not an option on this machine. It must have color cubes installed to keep printhead purged and operating
Question about Xerox Phaser Office Equipment & Supplies
...2, 3, 4] Heater test. 1 = Yellow 2 = Cyan 3 = Magenta 4 = Black 2. Did the test pass? Replace the printhead. Replace the ink loader assembly. Run clearISCfault test to clear the error Hope this ...
...Black ink) 1. Are the ink sticks all Xerox ink? Are they the correct ink sticks for the printer model? Yes)Go to Step 2. No)Advise customer. Run clear ISC Fault test to clear the error. The clear ISC ...
...Ink Melt [1, 2, 3, 4] Heater test. 1 = Yellow 2 = Cyan 3 = Magenta 4 = Black 2. Did the test pass? Replace the printhead. Replace the inkloader assembly. Run clear ISCfault test to clear the error. ...
Question about Xerox Phaser Office Equipment & Supplies
...too light. Other colours are ok. what to do ? it happen when the black ink is low or ink outlet get block;just replace your black cartidge it will sove your problem;] let me know if it's helpful to ...
Black Ink Stick Count Failure. Make sure you are using Phaser 8500 ink sticks Make sure the ink sticks slide properly Remove any broken or partial ink sticks from the ink-loading bin If the fault code
210 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
152 Questions
147 Questions
