HP LaserJet P3005n Printer "p3005 printers 2 paper" Questions

P3005 printer that prints wrinkled pages. I already checked for debri that might be blocking the rolls thus wrinkling the paper. What could be causing the paper to come out wrinkled? 2 reasons: 1. Was

...P3005 fuser is located at the back of the printer. The fuser has a thin film upper roller which can be torn, some symptons can be "Wrinkled Pages","Poor Fusing", "Toner Rubs Off the Page", "Pieces of ...

...p3005 with the jam code 13.01.00. It has had the feed rollers and sep pads replaced. When it runs it appears to catch on the separation pad itself since it shows a small buckle in the middle of the ...

p3005 it was working ok as we don=ont change the settings often. From yesterday, as soon as we give a print command, it gives a message "LOAD TRAY 1 LIGHT LETTER, then when we press green button

...as I put paper in tray 2 it starts engine test and spits out lined paper continuously until I stop it or take the paper out? bring the printer back to where you bought it and have them give you ...

2 error when no jam exists Check Tay2 paper sensor flag, located at tray2 pick up roller, its its stucked shoot the fault hp laserjet 4015 error code 13.98 paper jams in fuser. REpalced fuser, pick up

...p3005. Thanks Your printer has a misfeeding problem. It never fed any paper so the sensor never sensed paper and thinks that there was a jam. Try using the manual feed tray. If that works, pull out ...

2 or 3 Goto Start > Printers and Faxes. Right-click your printer and select properties. In this dialog you can change the tray. Usually it is set as 'Default tray'. Change it, apply settings, close

...paper from tray 1 or tray 2 Just had the same issue. I found the Flag on the Toner Cartridge that activates the laser unit to be broken off . Had to tear everything apart to find the flag that was ...

...P3005 How do I print a report as such: letterhead from bin1......copy from bin 2........final from bin 3 three different paper in three different bins................is there a way I can print this ...