Question about HP PhotoSmart Office Equipment & Supplies
...shut it down and turned it back on. Now it will not initialize. It cycled thru the HP screen with the progress bar, then goes to a gray screen, then a grayish purple screen, then back to the HP ...
...shut down the printer” followed by “Press Ok to continue”. Press Ok. If the printer has already initialized, then go to the next step. If not, the printer will start the “One time ink initialization ...
shut it down and back on and it's still not working - same message appears. 1. Get the unit into the "Support Menu" by following the steps below according with the product, A. - Press and hold the
...shut down completely. I had a 0xc18a0201 error message...fooled with it, checked/tried HP on-line advice, took it to BestBuy,...no answers...brought it home and tried GYAN 9's solution. I'M BACK IN ...
Question about HP PhotoSmart Office Equipment & Supplies
...shut down using button on/off. But printer refused to shutdown. After 30 minutes, I disconnected power cable. Removed cartridges. Reloaded cartridges. Reconnected power cable and got "Improper ...
...shut down ..press on to shut down .. Turn the unit on. The printer may display message "USE POWER BUTTON TO SHUTDOWN THE PRINTER" followed by "PRESS OK TO CONTINUE". Press OK. message: "welcome to ...
...the back of the printer. Turn the unit on. The printer may display message "USE POWER BUTTON TO SHUTDOWN THE PRINTER" followed by "PRESS OK TO CONTINUE". Press OK. The Printer will start the "ONE ...
...shut it down. When I pressed the OK/Cancel buttons, and tried to turn it off/on, nothing happened. Any other suggestions? The Cyan colour needed replacing, to which I did. Do I need to replace all of ...
Question about HP PhotoSmart Office Equipment & Supplies
shut it down during initialization. (see here.) Is this a new printer, or have you replaced the cartridges? See also here. and here. and to check cartridges here.(Make sure you press ok after aligning
Question about HP PhotoSmart Office Equipment & Supplies
...shut down. Or it says "Error: scanner could not be initialized because scanner not found. Thanks for helping Louise Dollin Hi, Shortly after the world started upgrading to Snow Leopard, reports began ...
280 questions posted
Usually answered in minutes!
1,869 Questions
1,438 Questions
900 Questions
484 Questions
508 Questions