Xerox WorkCentre C2424DN All-In-One Laser Printer "scanner adf cover" Questions

...ADF. (6) Remove the Control Panel Unit. (7) Remove 8 Screws from scanner base (8) Remove the Wire Clamp (9) Remove the Scanner Cover Assembly (10) Disconnect the Harness (11) Remove 2 Screws (12) ...

...Scanner Jam 1 Open the ADF top cover. 2 Remove the jammed paper by gently pulling it straight out. 3 Close the ADF top cover, and then load the documents back into the ADF. Note: To prevent document ...

...scanner I use the ADF to automatically draw documents into the scanner but for some reason this is not pulling the document(s) into the scanner to be scanned. I have read the manual but there is ...

...ADF. Scanner bulb does not light. If the scanner bulb does not light, verify that the wire-harness connectors from the scanner to the formatter are connected correctly. If the error persists, replace ...

...scanner error(046005 adf lamp failure) adf is not working or scanner There can be a few causes of this error: 1) Firmware Revision is not latest and lamp warm-up time is too short - update firmware ...

scanner. The maximum size for media in the ADF is 215.9 by 381 mm (8.5 by 15 inches). 1. Make sure that the flatbed scanner contains no media. 2. Close the flatbed scanner cover and put the top end of

...ADF not working. The flat bed scanner runs instead for fax or copy. Displays Doc Cover Open message Open ADF and close again. There must be tab in the ADF which is not pressing a microswitch located ...

...scanner, no lines. Hi, Your machine ADF is dirty or dust in adf glass please clean it by soft cloth and scane again its clear and sharp. thanks. hello, there might be a dirt or white out on the ...

...ADF cover also checked visually & it looks normal. Because of this error the scanner & photocopier doesn't work, but still can be able to print files from the computer Sounds like a sensor is broken. ...