...Drum cleaning motor error: K The drum cleaning motor failed to switch on (motor lock), or failed to reach the required speed within the prescribed time. • Motor block by physical obstruction • Motor ...
Question about Ricoh Aficio Office Equipment & Supplies
...drum motor error. sc440-2 is specific to the color drum motor. The problem is either the motor itself, the drum gear position sensor, or one or more of the color photoconductor units. The ...
...drum motor error. These machines are bad about the waste toner building up in the drum unit. You could try and take the auger out of the drum unit(very messy) and clean it out or try replacing the ...
Question about Ricoh Aficio Office Equipment & Supplies
...441 in cl3500dn printer SC 441 - development motor lock.Possible causes: too much load on the drive mechanism development motor defective poor drum motor connector connection interface board ...
Ricoh CL2000N Error SC441 Does anyone know how to correct this error? It means the PCU (CMY) motor error. Try removing and reinserting properly the CMY PCU drum or replace it with a new one.
sc500 not work the engineer say it need motor "Main motor lock" Check the drum/dev unit that can cause this error code.
Question about Ricoh Aficio Office Equipment & Supplies
...drum motor error. This error could be caused by a bad color drum unit (any of the 3 colors) or the drum gear positioning sensor, but more often than not it is because of a drum motor that went bad. ...
Question about Ricoh Aficio Office Equipment & Supplies
...drum motor. You can try removing and replacing the black drum and making sure nothing is obstructing its movement (like a scrap of paper stuck somewhere or a chipped gear). You might want to have a ...
...drum motor error. It could be caused by anything from a faulty circuit board to a bad motor, but the most likely fix (and the easiest) is to replace the color PCUs (photoconductor units) which I ...
Question about Ricoh Aficio Office Equipment & Supplies
drum motor lock (cmy). 440-1 is for black. Pull each drum unit out and look at the drum surface if one is not turning good it will have toner all over it. Could be that the drum is full of waste toner
201 questions posted
Usually answered in minutes!
267 Questions
215 Questions
218 Questions
178 Questions
117 Questions