Ricoh Aficio SP C410DN Laser Printer "copier cover open error" Questions

...cover is open. • Close the cover. 2. No paper in the tray • Load paper in the tray. 3. The printer has stopped printing due to a major error. 4. The print cartridge is not installed. • Install the ...

...copier SP then type in 5801 and press # selest execute then power off and back on. Your machine should now be working. Hope this helps. Error code sc548 refers to the fuser unit not being set or ...

...Open right door. Density sensors (5) are located above the transfer belt behind the black plastic cover. Use a damp rag to clean. If you are trying to clear SC400 code, you will also need to pull out ...

error? Did you take out the toner cartridge and paper trays and open all the covers to try to find the misfeed? If there is really nothing there, you can try turning the printer off and back on to see

...be an error message appearing on the display. It might say out of paper, or out of toner, or a cover open, or it might show a code (such as "sc 501"). What is the code or error message that

open front cover" Power light and error light flash continually. no paper jam and wont reset? any sugestions Found solution myself.. The paper sensor arm with flag and sensor was missing from the exit

...open cover B and D. Remove the fuser unit, then reinstall it properly. Close covers D and B. The error clears automatically if the fuser unit is properly installed. If the error is not cleared, the ...

...message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor or sensor

open duplex unit cover, remove misfed duplex unit" There is nothing that i can tell or see caught in the feeder, help! it is possible that the duplex door switch or actuator is bent or out of position

Cover open but cannot clear message error All sensors and switch have been tested. Board has been changed still same error. my dear you chek wire cable i feel sensors cable wire is broken try checking