Brother Multi-Function Center MFC-3360c All-In-One InkJet Printer "dispensing ink" Questions

...ink dispensing unit (which travels along the page dispensing ink during printing) is all the way to the right side of the printer. To get it to the left side (to insert the ink) turn the printer on, ...

ink is dispensing to see if the tape is still on the cartridge of blocking the ink from coming out, if so remove. when touching the area where the ink comes out, be very careful. look into the printer

...dispensing enough ink. On each end of the drum there is some small plastic covers with one philips screw. These are to control the scrapers to add more ink. Adust them slightly to dispense more ink.. ...

ink is not dispensing I recently replaced the black ink cartridge on our Brother MFC-490cw and it is not dispensing. All of the other cartridges are working properly. I have tried running the cleaning

ink in known dispensing rates, and a little chip that keeps track of the ink that is dispensed. Commercial refilling houses have the hardware and software to reset the little chips back to "full". And

HP officejet 6500 does not dispense ink My HP Officejet 6500 E709 series is not printing. It actually moves, and pulls the paper, however it does not dispense the ink (all colors). Tried with colors ...

...a 10 or so q-tips and some rubbing alcohol and clean the build up of goopy ink. You won't ever get it completely clean because more ink will keep dispensing. Close it up and run a test print

when i scan a document the file size is too large. a 1 page document scans as over 27,000 KB using 300 dpi. if i use smaller dpi the print is too light. 1. Increase the contrast on the print. That is ...

...ink dispensing slots as well, and gently as well. As previously mentioned, you should get ink on the q-tip when cleaning the ink distribution slots. Three colors, yellow blue and red from the color ...

not dispensing ink even though paper goes through printer. if the ink is new then you will have to run a head cleaning program on the printer ( did you remove the sticker from the top of the new inks