...color cartridge installed. E5 is a Cartridge cannot be recognized error. Reinstalling the cartridge could clear the alarm. If this does not work, Removed both ink cartridges. Turn off printer and ...
Question about Canon PIXMA Office Equipment & Supplies
...color ink at all It sounds like you have a severly clogged print head. The nozzles are likely gummed up and need to be cleaned. To do this, you need to inserta new set of OEM cartridges. Run the deep ...
Question about Canon PIXMA Office Equipment & Supplies
...color ink light started blinking and then the amber alarm light would blink 8 times, which apparently means something ? Then another error message would come up on the screen that read, " Service ...
Question about Canon PIXMA Office Equipment & Supplies
...Color Ink and Black Ink. The Alarm Light on the Control Panel is lit and one or both of the black ink and color ink lights flash. I have tried pushing the reset button for over 5 minutes which was ...
Question about Canon PIXMA Office Equipment & Supplies
...Ink Tank Of The Following Color Is Installed" The "More Than One Ink Tank Of The Following Color Is Installed" message appears when I try to print. If I open the top cover as if to change the ...
...Clear Ink Status InformationWith the LCD of this MachineMake sure that the machine is turned on, then press the COPY, FAX, SCAN, or MEMORY CARD button. The current ink level will be displayed on the ...
...color. Thanks for any help. Usually the cartridge is out of ink in which case get it refilled or it may be electrically failed in which case you will need to buy another cartridge. If putting a ...
Question about Canon PIXMA Office Equipment & Supplies
...clear E27 Waste ink absorber full 1.With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button. 2.When the Power is lit, ...
Question about Canon PIXMA Office Equipment & Supplies
...clear. Again try to press & hold the stop/reset button for 3-5 seconds If the stop/reset button does not work You may try pressing the color button Depending on your Canon printer model there are ...
...color ink lights remain on and it won't print. I think the E2 error message is on. This hapens when refilled cartridges are installed in the printer. To rectify the problem, look for the ...
99 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions