Canon PIXMA iP1800 InkJet Photo Printer "paper folding corner printing" Questions

corner of the envelope flap is folded, flatten it. Use a pen to press the leading edge in the inserting direction flat and sharpen the crease. The envelopes may jam in the machine if they are not flat

...printing paper to confirm if the paper curl is eliminated to within approximately 2 to 5mm / 0.08 to 0.2 in (B). It is recommended to print on curl-corrected paper one sheet at a time. The media type ...

paper on the upper-right corner of the cassette with the print side facing down. Note: * Since the Credit Card sized paper, Canon Photo Stickers, and Legal sized paper cannot be fed from the cassette,

paper folding problem I have a HP LJ 4350 that prints about 600 sheets a day. The printer is starting to fold the paper on one corner. I did a full p.m. and. test. The pages will print but some of the

...corner of the sheet as it exits the paper path to print on other side of sheet replace the FUSER Assy. This is due to the paper pickup assy, when the paper is being fed back through the paper pickup ...

...paper it prints with the top corner folded over, then jams. I've cleared jams from back, but the front paper tray seems like it isn't seating right. folded corner is 2 things a) it's gettig folded ...

...paper and folding the corner Open the back of the printer - make sure it is clear. Then remove the toner check throughout the printer - reseat the toner and try to print There is several things you ...

corner of each page folds. This tells me something is getting caught usually I would recheck the Paper Tray. If possible you could run the paper through the Bypass or Tray One as HP would call it. See

...corner of the page Check carefully for any small scraps of paper caught in the paper path. Do a 1/2 way test, do a print job, listen for the paper to get just under the toner then quickly open the ...

...corner of the paper when we print it out. We cannot find any paper stuck anywhere. We can't download the repai manual. The Printer's Fixing Film on the fuser assy is broken. It should be replaced. Go ...