Westinghouse LTV-46w1 HD 46 in. LCD Television "big bulge" Questions

...the top..if bulged please replaced with the same value.. if you don't have bad caps there is a big possibility that your main board is bad.. if the main board is bad you only have to do is to ...

...bottoms bulged out,they need to be replaced.This should get it working again.Most of the time the big black capacitor on the power board goes bad,and bottom bulges out,but sometimes it is the other ...

...bottoms bulged out,they need to be replaced.This should get it working again.Most of the time the big black capacitor on the power board goes bad,and bottom bulges out,but sometimes it is the other ...

...the same value.. watch this videos to give some idea: if you don't have bad caps there is a big possibility that your main board is bad.. if the main board is bad you only have to do is to ...

Go to turn it on a big w flashes on and off and then no picture. Hello, All you need to do is to open the back cover of the television to check for bulged capacitors, dry soldering, but if otherwise ...

Dead set, Akai 42" Plasma PDP4294, no power Looking over very big and very complex SMPS board, all SMD fuses are good and main 8A line fuse is good, no shorted switching transistors or diodes ...

...bottoms bulged out,they need to be replaced.This should get it working again.Most of the time the big black capacitor on the power board goes bad,and bottom bulges out,but sometimes it is the other ...

...again. Take it out and look inside the buld. There is a small cylinder of glass which is about as big around as a pencil. It should not be shattered or bulged at the bottom. if it is, replace it. ...

...switch was. Help of where the relay switch is would be greatly appreciated! Power supply is the big board at the top middle, but a short on any board could do what you are describing, You need a ...

...wont turn on. The red light will flash a code. If it's 3 there are bad caps on the power supply. 2 big ones bulged near the edge. If the light flashes 7 times it needs a Y-Drive and can be a costly ...