...paper will exit with wrinkles in it, sometimes jamming. I cleaned the rollers, which helped with the jam but not the wrinkling. Advice is appreciated. Check paper path,especially near ...
Question about Samsung SCX Office Equipment & Supplies
...When selecting envelopes, consider the following factors: - Weight: The weight of the envelope paper should not exceed 90 g/m2 or jamming may occur. - Construction: Prior to printing, envelopes ...
Question about Dell Office Equipment & Supplies
My Dell 1100 keeps wrinkling and tearing the paper I tried wiping the rollers with a damp cloth but that is not helping Depending on wear the tear is at determines the issue. The wrinkling paper and ...
Question about Samsung SCX Office Equipment & Supplies
...paper it wrinkles the page. Is there something I can do to try to fix this before ordering a new tray? The print quality is very poor. There smudges and streaks as well as white blotches where there ...
...wrinkles paper. I have replaced and removed toner cartidges tono avail. Try checking the fuser unit inside the back of the printer. Open the door and pull the paper path tray down. You should see an ...
paper wrinkles when printing I have an old Canon PC 25 copier. Paper comes out wrinkled. You can try these following solutions: If the paper does not completely eject, press the paper with folded side
Question about Samsung SCX Office Equipment & Supplies
HP LaserJet P3005 printer prints wrinkled paper I have an HP LaserJet P3005 printer that prints wrinkled pages. I already checked for debri that might be blocking the rolls thus wrinkling the paper. ...
Printer won't work, paper jam. Ok, so we got this printer like 9 months ago, and its been working fine, we're replaced the ink cartridge, and so thats not the problem, but when we try and print, it ...
...so thats not the problem, but when we try and print, it warms up for a while, and then always says paper jam, so we just open the back and front doors, and it starts warming up again, it doesn't
Question about Samsung SCX Office Equipment & Supplies
paper from a new ****. If still wrinkles might be an issue with your fuser. The fuser is the part that heats the toner onto the paper and if the paper contains too much moisture content (from improper
371 questions posted
Usually answered in minutes!
1,017 Questions
482 Questions
287 Questions
235 Questions
119 Questions