HP PL4260N 42 in. Plasma HDTV "mean tv picture keeps blacking" Questions

tv turns on but no picture just a red blinking light stays on and will not turn off red light keeps blinking but no picture screen remains black no sound no picture Red light blinking means there's a ...

...hello try changing the picture ratio...what i mean is try 16.9 widescreen or 4.3 ledder box the tv is tryn to produce a pic bigger or smaller than what you have keep tryn different picture ...

...tv owner manual, also check your guaranty terms. ok, what about picture tube quality.. is it good or seems abnormal sometimes.. blinking light means that system has detected some fault. it can cause ...

TV is not too old but when you are watching it the picture goes black but the sound stays on. I have replaced the T Con Board twice but same thing. I have tested components on Power Board and found no

...tv picture keeps going light dark light dark. What is causing this problem? It is very annoying when it goes dark because you can't see the picture. Please help. I have Sony KDL-32XBR9 and I have ...

...TV picture and sound suddenly went off. There was no pop or other noise when this happened. The red light at the bottom right is still on and not blinking. I unplugged the TV for a couple of minutes, ...

TV Im getting the black screen that alot of people keep talking about! Ive checked the capacitors and they all look fine, no swelling or bulging at all! is there a next common problem or could it be a

...TV all it has a great picture & sound. After apx. one minute it will lose the sound and then it will turn itself off. Then it will reboot itself back on, this will happen 3 times.After all that the ...

...tv. There is no fix for the problem, But if you go into the menu and select "BURN-IN" OR "Pattern sweep" or WHITE Screen than you will see exactly what i mean. Now, you can keep it on this pattern ...

TV. Also reset the HD box. Nothing. I keep doing it over and over for hours. Finally, just suddenly it will come on after I had shut if off so many times and tried resetting the code. Nothing seems to