HP Photosmart D5160 InkJet Printer "power button blinks red" Questions

power button shows a blinking red light and printer does not respond to anything. I unplugged the power cord and re attatched it and got a blinking green light for a couple of secands and then it goes

power button and no response to anything. I unplegged and replugged cord and get a blinking green light for a couple of seconds but then right back to blinking red. Please help. Thank you. Logic Error

power button. it does not do a thing - it just blinks red on the power indicator-to get it off i have to unplug it. HELP i have unhook it completely and reattached all the cords and this did not help.

...power button. There are also 2 ink drops present in the screen. Any suggestions as to how I can fix this. HERE is a link directly to HP's troubleshooting documentation for your model printer and ...

...button that will work is on and off.. At this point, tried to remove loose black cartridge, which I did, but it was difficult, as the black box beneath the cartridge panel (when in rest mode at the ...

...power button to turn off the printer. Disconnect the power cord from the back of the printer. Open the top cover of the printer. Remove the print cartridges from the printer. Slide the cradle to the ...

power. Use a lint free cloth for this. 3. Also check if any light is blinking. after you fix the ink cartridge, it would automatically print an alignment page.. Check for the band, and see if there is

it blinks red and green, tnx! Depress power button while plugging the canon pixma ip1000. When you depress the power button, the printer can be used even if the in waste absorber hasn't been replaced

...Power button. 3. Keep holding down Power button and let Resume button go. 4. Press Resume button 2 times then let BOTH buttons go. 5. Green lights will flash and then stop blinking. 6. When green ...

...with the same problem. I don't know if any errors with red blinks for the 2844, but the printer will blink red five times if you power it up with the button held. Is the button possibly stuck