Dell 1815dn All-In-One Laser Printer "close fuser door" Questions

fuser door open? how do i close fuser door? Try fuser door should be in the back. If it is close, it could be a door sensor issue. Also make sure that the fuser is in correctly.

fuser door is closed. I want to fix the problem that is causing the "fuser door open" error message. Thanks! Adam Look at the fuser door -- there is a "finger" that sticks out, and connects,

...fuser door open error getting "fuser door open" message. opened and reclosed fuser door to make sure fuser door was closed. restarted printer. still get same message. what can i do next? There is a ...

fuser back in, and same message. Any ideas? There is a switch that should "close" when the door closes. But, that switch either is damaged, or it is not sending the "now closed" signal to the printer.

...close the two doors at the same time, a mechanism inside the printer may become dislodged and return an error message. Things to Try Power off the printer. Remove the fuser assembly and carefully set ...

fuser door open" what is "fuser door open" Fuser Door Open is the message on the display when it's powered on. I took the back apart, removed the fuser, looked all over. I couldn&

fuser 07: Close the fuser cover 08: Attach the top rear door 09: Lift the paper bail, and then insert the fuser wiper cover Or watch this video Lexmark Product Videos click on Service Maintenance then

fuser door is stating it is open when it is closed I have turned off and taken out fuser turned on and then replaced. still showing fuser door is open will not print or copy That is a problem with the

...Close Fuser Door" What is it? where is it? how do I close it? Colin Your Samsung ML-3561ND looks to be an HP Laserjet 4000-series printer. Same engine, different electronic. The fuser is in the rear ...

...fuser door is at the back of the machine. Open the door, pull down and close firmly shut. If the error persists it could be that the sensor has gone bad. The sensor is actually hard wired to the High ...