...used, the remaining battery power may not be displayed accurately. and: Use sufficiently charged batteries when using Ni-MH batteries. You also should set the correct battery type in the setup menu. ...
batteries replaced but still says change them Battery was running low on my camera, so I changed the AA batteries and also the lithium CR1220 battery. The screen still says change batteries and keeps ...
batteries replaced but still says change them Battery was running low on my camera, so I changed the AA batteries and also the lithium CR1220 battery. The screen still says change batteries and keeps ...
Question about Panasonic Lumix Cameras
Panasonic DMC FX01 with new battery still won't turn on? New battery purchased - fully charged (tested). Camera has no sign of life. If your panasonic camera uses a panasonic battery and you try to ...
...battery 1 mm thick 6mm diameter, it turned out it is a special, rechargeable one, it gives 3 v, but it can use a charging voltage as low as 2.8 v.Earlyer I tought this was the problem- because I have ...
...battery pos(+) and neg(-) terminals. It should be 4VDC. If less than 3.8, I would be suspicious it is not taking a full charge. New batteries on ebay are cheap, and would not be a loss since you can ...
Battery life I only got about 8 pics off before the battery started getting low,Any suggestions? Are you keeping the large LCD screen on all the time? If so, that will dramatically reduce battery life
...battery before using it for the first time, or if you have not used it for a long period. 3 months is a very long period. Also check if the battery door is closed correct. Most cameras do have a ...
Batteries discharge very quickly You have either a battery fault that is causing the chemicals not to hold the charge, try new ones. If this doesn't work it is possible that the camera has a small ...
119 questions posted
Usually answered in minutes!
630 Questions
338 Questions
296 Questions
256 Questions
207 Questions