Question about Konica Minolta Magicolor Office Equipment & Supplies
paper jam in the fuser (the hot part that fixes the toner to the paper). Check if there is any sheet jammed inside your printer or if any sensor is in the wrong position. If everything seems to be ok,
paper jam in fuser I have a paper jam problem. The LCD say that it is stuck in the fuser. I have pulled out the necessary item in order to pull out the paper. The paper is jammed tight and cannot be ...
...Fuser i had... new there was no paper jam so looked about for the sensor and found that the little arm thing that gets liffted up as the paper pass was not falling back down so it thought the paper ...
...fuser My printer is pulling paper all the way through and leaving it blank. (printing blank pages). After producing a blank piece of paper in the output tray, the printer immediately goes into an ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
magic colro fuser Paper jam Code fatal eror 14h. magic colro fuser Paper jam Code fatal eror 14h.
Question about Konica Minolta Magicolor Office Equipment & Supplies
...fuser to get the piece of paper out This error message is displayed by the printer when paper is jammed in one or more locations. In such a case, users are recommended to remove the jammed paper from ...
...paper, check to see if it is a fuser problem. Fuser problem: start a print from tray 1/manual feed and just as the trailing edge of paper is entering the machine; quickly open it to stop print and ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
...paper on the fuser unit. The coming paper sticks to the fuser more than it should and gets torn while coming out. Could that be caused by a wrong toner type fill? As far as I know, 2300w does not use ...
Question about Konica Minolta Magicolor Office Equipment & Supplies
...paper jammed in the fuser where we couldn't see it until we had the fuser out of the printer. We are shopping for a new printer as the repairs will cost more than we paid for the printer. Hello ...
...fuser'. The paper is not wrinkled any more, but jammed. Also the machine gives often the sign 'put media in tray' when there is already paper in the tray. Does anyone know what I can do about it? I ...
134 questions posted
Usually answered in minutes!
321 Questions
259 Questions
244 Questions
182 Questions
97 Questions