Question about HP LaserJet Office Equipment & Supplies
...skewed vertically My HP laserjet 3050 does not print square to the top of the page. Usually the left side is lower than the right, and is especially noticeable when printing checks. I tried cleaning ...
...right until it gently touches the left edge of the envelope stack. For size Invitation A2 and C6 Envelopes, press the inside of the paper length adjuster handle to release and lower it. For all sizes ...
Question about HP LaserJet Office Equipment & Supplies
the paper to be fed skewed. I tried taking out the other spring but all i get is paper jams. Know I need to figure out to the replace the inside left panel or make a make-shift retainer for the spring
left, paper skewed. your printers gears have got mis-aligned or may be even your paper feeder tray is not availble or not fitted properly, for gears problem u get your printer serviced.wish u success!
Question about HP LaserJet Office Equipment & Supplies
...skewed/crooked. It was like this when it came out of the box new. I too have tried all fixes. Luckily, I dont yet have any paper jams; just a strong desire for straight paper to give me straight ...
Question about HP LaserJet Office Equipment & Supplies
...left so that the paper is not held at all. The pick-up for the paper is at the bottom right hand corner and if the guide is loose the paper can skew as it goes in - and then it only gets worse. ...
...left side is able to advance and the right is hitting the obstacle. If your printer has a paper drawer, turn off the power, remove all cords and the cartridge. Pull out the paper drawer and then ...
Question about Dell Office Equipment & Supplies
...left side not pulling at all. Look closely at the "path" that the paper takes through the printer -- you probably have a small piece of paper stuck somewhere, that is causing the paper-feed to get ...
Question about Ricoh Office Equipment & Supplies
...left side, but it doesn't help. Per The problem is in the registration. the front usually or the back bushing on the registration roller is broken. you can see that when you will open the right door, ...
Question about HP LaserJet Office Equipment & Supplies
...is being fed into the printer, Pull out your paper tray, and make sure the adjustable paper guides on the left and right sides of the tray fit up snugly to the paper in the tray. try this, good
122 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions
