Question about Toshiba Satellite Computers & Internet
...COMPUTER IT IS A TOSHIBA A135-s2246 regardez sous le module wifi il y est inscrit sur la carte mere c88 .courcicuitez les deux points de soudure du c88 et allumez la machine. ...
Question about Toshiba Satellite Computers & Internet
...by spring clips. Remove the card from the connector.There are two solder contact points labeled "C88". Connect the power adapter to the laptop now. Short the two contact of "C88" and press the ...
Question about Toshiba Satellite Computers & Internet
...the wires connected to card, just move card over to expose area below card. 5)you will see C88 clearly labeled right next the jack that the wireless card plugs into. There are two little ...
...the Keyboard from the laptop Remove the Wlan card Under this you will see two contacts marked C88 (there is an X next to them) Power on the laptop and touch the two contacts with a flat blade ...
Question about Toshiba Satellite Computers & Internet
i have changed toshiba satellite a100-233 keyboard. now locked to bios password. managed to short c88 solders but still screen appears asking for password. wot to do..? Firstly power down the system. ...
Question about Toshiba Satellite Computers & Internet
bios password needs to be reset. can't find c88 I have a Toshiba Satellite a105 that I need to reset the bios on. I cannot find c88, no spot to use a 25 pin cable, and it doesn't have a floppy drive ...
Question about Toshiba Satellite Computers & Internet
...unscrew and remove the modem card in the center. On the system board you will find 2 solder points c88. Short those 2 points out while you press the power button on, which will reset the bios ...
...the toshiba equiums by removing the ram and wlan card and then shorting out the two contacts marked C88 with an X next to them...you might want to google that bit of advice to double check if it will ...
Question about Toshiba Satellite Computers & Internet
...reason to disconnect it ) Unscrew and remove the modem card in the center. There is 2 solder points c88 on the system board. You need to short those 2 points out while you press the power button on. ...
Question about Toshiba Satellite Computers & Internet
...dont have to remove the battery.. I found this site that tells you two "jumpers" (solder squares) C88 i believe under the network card. But if you follow this link and follow the directions it will ...
1,247 questions posted
Usually answered in minutes!
1,650 Questions
1,307 Questions
1,252 Questions
1,043 Questions
438 Questions