...ink level counter reach zero level. Cartridge can not be used again even though it was refilled, because the counter still reads zero level.Replace the new cartridge or reset the counter using ip1600 ...
Question about Canon PIXMA Office Equipment & Supplies
...Ink level counter (program) didn't read actually ink at ink tank. Brand new cartridge ink level counter 100% (full), and ink 100% (about 10 ml). After may printing, ink will dry out, and ink level ...
...ink counter: Press Menu-Scan-Copy-Scan to enter service menu. Use arrow keys to scroll to "Service menu counter access". Press OK. Use arrow keys to scroll to "ABS-M DOT COUNT" Press Copy. Use arrow ...
...orange blinking light. This is your reset button, usually the paper feed button also. Hold this button in for 5 seconds until the light goes out. Note: this will not reset the ink level back to
Question about Canon PIXMA Office Equipment & Supplies
ink level is set to zero, but the lights are still flashing. I think the resetter you have downloaded is for resetting waste ink counter, not for ink level. For resetting ink level counter (that reach
ink level counter reached zero. If using original ink tank, just replace with new one. If using "hardware resetter", reset ink level counter. If using CIS ink tank, it will be auto reset. Remember, it
ink level (ink out in program). After replacing black ink, may be the other ink tanks reach zero level, so message to replace ink tank appear again. You can use the used ink tank (by refilling) if you
Question about Canon PIXMA Office Equipment & Supplies
...ever happens. is there a way to override the error? tried unplugging for 30 secs, fails. Ink level at chip reach zero. Reset ink level counter using hardware resetter. Or Use CISS chip with
ink level reaches the zero point on the chip. For some ARC chips (commonly used in the system CISS), ink level it can be reset to 100% again by pressing the reset button on the chip. If using original
Question about Canon PIXMA Office Equipment & Supplies
ink level reaches the zero point on the chip. For some ARC chips (commonly used in the system CISS), ink level it can be reset to 100% again by pressing the reset button on the chip. If using original
531 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions