Question about IBM Office Equipment & Supplies
...cartridge. Turn the printer off. Remove the colour cartridge. Purchase a new colour cartridge. Insert it. Turn the printer on. If you still get the error, take the printer to a qualified
Question about Brother Office Equipment & Supplies
turn the printer on, so the only way to extend the life of the ink is not to turn the printer off netween use, which the domestic useres do not of course do what i did throw the printer away and get a
...only black my printer does not print in colour though i have coloured ink installed you must have turned your printer to "print in black mode only" by mistake.change the settings to "print in
...turn on the printer 2. Half-way through start-up cycle, disconnect the AC plug 3. Cartridge carriage should now be moveable by hand 4. Manually line up the colour cartridge door and open it 5. Pull ...
...turn it over to see the coloured pads. They should look red, dark blue, and orange ( the colours are actually Magenta, Cyan, and Yellow, but are concentrated). If any of the pads are pale or ...
Question about Brother Office Equipment & Supplies
...Go into the settings when printing and ensure that greyscale or black/white printing is not turned on. please install again software .First time uninstall
Question about Brother Office Equipment & Supplies
...Turn the printer off Remove the colour cartridge dab the cartridge point with a slightly damp tissue, if ink comes out then turn printer back on without the colour cartridge and try and print some ...
...all that was printed was grey - no colour. When I tried to photocopy in colour I only got grey. I turned it off and tried to reset but same thing. How can I fix the problem. It was working fine ...
...Turn off the printer.2) Shutdown the PC to which the printer is connected.3) Remove the USB/Serial cable through which the printer is connected to the PC and reconnect it back.Now replace the color ...
turn off colour management and then instal the profile. The printer profiles are in the printer properties tab either in the control panel under printing preferences, or in the dialog box that pops up
565 questions posted
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions