Question about Pitney Bowes Office Equipment & Supplies
...imagistics pitney bowes c180 copier says E2 and printer tray light blinks. Is there a code to reset this machine or what this code means? E2 means paper miss feed press resum button the go to ...
...copier. I am unaware of the existence of that model and will therefore assume you meant 6570. I mean no disrespect in this clarification if it is indeed appropriate. With that in mind your problem ...
Question about Sharp Office Equipment & Supplies
...you have the guide plates set correctly and that the tray is fully set Your copier is reset memory press the start button 2 show a sub code and post it. Means paper tray motor lock or not
Question about Brother Office Equipment & Supplies
paper on the rear tray. When you say the rear tray what do you mean, ON the document feeder tray or raising the document feeder up placing the document on the big glass. Never heard of a rear tray????
Question about Brother Office Equipment & Supplies
...mean and what do I do? use the right arrow go to paper menu scroll to the right to paper source select if it is set to mp tray reset it to tray one. if its set to tray 1. check the side of the paper ...
Question about Brother Office Equipment & Supplies
...mean? The blinking triangle indicates one of the following: Paper tray is empty, Door open, Paper jam, Misfeed from tray. To fix it: Verif that the print cartridge is present and that the ...
Question about Ricoh Office Equipment & Supplies
paper tray unit, it may be can be reset,the procedure as follow; 1, press "clear mode"( the c in the diamond). 2, enter107 then press and hold down "stop/ clear" key 3, when you enter the sp mode turn
Question about Brother Office Equipment & Supplies
...paper is ok it could be the lift motor has failed or the main boardPF or main boardMC or the dc power supply needs to be replaced. to reset the code leave the machine on and open then close the front ...
...Reset the code by turning off then on the main power from the back left side of the machine. Leave tray 2 open until the copier warms up and says ready. Then close tray 2 and wait to see if the code ...
paper is not loaded properly. Open then close the front door to reset the code then immediately open tray 3. Check to insure that the paper is loaded properly. I would remove all the paper and then re
565 questions posted
Usually answered in minutes!
1,135 Questions
1,072 Questions
1,012 Questions
767 Questions
733 Questions