Brother MultiFunction Center MFC-440CN All-In-One InkJet Printer "connect 465 printer" Questions

...and want to change to connection on the laptop to that. I cannot find the 465 tochange to. Sharing must be enabled on the new printer for it to appear on the network. Please specify OS for

...465 cannot scan from paperport or directly from the printer. I get a message to download msxml 4.0 while attempting a scan. Already have msxml 4.0 on my computer. HELP I just experienced the same ...

...printer machine is working but the scanner. everything else is connected, but it wont scan..can u help me? driver for your scanner is not properly installed or just corrupted..down load a ...

...as... 1. The planetary arm assembly not engaged correctly 2. Ink cartridge/purge switch harness not connected correctly 3. Purge cam switch broken 4. Gear(s) on maintenance unit broken 5. Paper feed ...

...connect a Brother MFC-465-CN printer to my system. I purchased a USB 2.0 high-speed cable which is 11 feet long. In the installation manual there are two references to the USB cable and they both say ...

...465 ,and make sure that Use Printer Offline is uncheckedOne or more ink cartridges can be emptied, so you dont get printed, check for that and if found replace the catridgeIf all the above said is ...

...connect error message. I have used the following pop3 settings: pop.gmail.com 995 smtp.gmail.com 465 & 587(tried Both) with authentication same as incoming server. i've also tried using the pop3 ...

...printer and faxes" under control panel, make a right click on the MFC-465 icon, go to properties, then go to the ports tab a click on "Add Port" select Standard TCP/IP and type in the new ip address. ...

465 (SSL) and 587 (STARTTLS). I've forwarded these ports on my router. A forum poster suggested that the workcentre does not support the above methods of authentication. Is this true? I saw a brochure