Navman F20 GPS Receiver "car charger not charge" Questions

...car charger it will charge when connected to the PC, but not with car charger. TomTom sent me a new charger, still will not charge(the green light doesn't com on). The charger light comes on and is ...

...car charger and turn it on. Tap the lower right hand cornor where the sat. signal graph is. On the screen that comes up check to see if it is chargeing while connected to the car charger. It should ...

...car charger or mains adapter but will charge from garmin in car charger Your Navman will not run in car unless the output on the charger is 1000ma or 1a. you need to buy a genuine charger, motorola ...

...car and AC charger? Do not try to charge via the USB as many USB ports can not supply enough current to charge as fast as the wall or car charger. If your chargers are okay, then I would suspect a ...

...car, not switching on at all, pressed reset but nothing Hello there, The problem with the device is the battery is dead and the charger is not charging it. that is why it is not turning on and, that ...

...car charger will not charge with car charger you'll need to use a usb cord to recharge it once the battery gets to real low. For some reason the car charger won't work. you can plug it in to the usb ...

...charger base. Why? if it is not charging in the car then the socket in the car is dead, blown fuse or defective socket.. According to Tom-Tom, the 920 will not charge, or charges only minimally (ie: ...

...car charger OR AC charger, it never continues to charge unless held in place very firmly. If attempt to charge w/USB cord, it reads that it's connected to a PC and prompts to follow instructions. ...

...car charger. When the car charger is plugged in, the green light disappears. hi tc76, plug it in and let it charge for awhile using a know good charger, like the car charger. it has a indicator light ...

the charger. Also check the charging port on your gps and the port where you connect the charger on the car, if the two seem to be working when tested on another device. That should do the job for you