Toshiba 32HL67 32 in. LCD Television "power surge tv" Questions

power surge hit my surge protector with my 'sony tv hooked to it. the surge protector was destroyed. Now tv turns on but then turns itself off Automaticlly Well, the power supply may be still damaged ...

...power surge plug ...now that i have power back tv wont come on Some will say a surge protector will save electronics. I can tell you they may not help at all. A power surge is extremely fast and can ...

...power problems all the time!! hope this helps,ben Surge protector's do not switch off any device, unless the surge protector is faulty itself. If the TV wasn't conected via a surge protector and a ...

...power surge cause volume to go out on tv and not the picture Yes. There is a possibility. If you suffered a power surge, the possibility is there. I bet you are connected to a satellite or cable box. ...

power surge my TV, DVD player and my Direct TV box were all hooked to the power surge strip. After the power surge only my TV would not work. I have tried the 30 sec power off but still nothing Hello,

...power, surge protecter wont reset, but have power to dish, wii, and dvd player but tv wont turn on. Is there a reset on the flat screen tv's? not reset on this set , check power supply for bad ...

...fuse of the TV by opening the back panel. Check Outlet For Power---If On Surge Protector (should be) Check For Blown Surge Protector---If Outlet Good And No Surge Protector, Likely TV Power Board ...

...power supply, the TV also has small surge protection devices (MOVs) installed after the fuse, any surges the come along and big enough will cause the main AC fuse to blow. When you surge protector, ...

...power surge. Tv was on surge protector. Now no power will come on and just makes a buzzing sound. Have you tried plugging it in without the surge protector?  I would wager that either a) the ...

power surge that probably fried your TV. * First check the power where the tv was plugged in. Is it a power strip or a surge protector ? Surge protectors typically have an on/off switch and a separate