COVER OPEN PROBLEM!! LEXMARK X3470MODEL 4427-001I cannot get rid of the "cover open" mesage on the display screen on the printer itself, it will not allow me to print. yes this is an hardware issue ...
...X83 all-in-one printer my printer does not feed paper. al text printsas clutter in one half inch of edge after paper is ejected. Hi gerby, need to eliminate a few issues to get to the cause. First, ...
cover. 2. Look for any obstructions in the paper path and remove them if necessary. (It is possible to move the carrier assembly with the power off.) 3. Turn the printer on, load some paper, and press
...X83 "Unlock Scanner" error When I plug the printer I get the message Unlock Scanner. I looked for solutions in Lexmark web site and I tried both posted. One, to move lock button in back up and down, ...
...x83 printer the carrier slams all the way to the left with a lot of force. The printer worked fine all I did was replace the cartrige. The power button from that point on did not even work I have to ...
...cover. Look for any obstructions in the paper path and remove them if necessary. (It is possible to move the carrier assembly with the power off.) Turn the printer on, load some paper, and press the ...
...Open the front cover of the printer where the cartridges are located. Look for two black bands that span from left to right (they should have one serrated side and one smooth side). Just above the ...
Question about Lexmark X Office Equipment & Supplies
...x83 with same message but there is no paper jammed anywhere Turn off the printer. Remove any paper trays. Inspect them for wrinkled or damaged paper. Also open the back cover of the printer if this ...
Question about Lexmark X Office Equipment & Supplies
Open the printer cover. The print cartridge carrier moves and stops at the loading position, unless the All-in-One is busy. Note: If the carrier does not automatically move to the center, turn off the
cover. 2. Look for any obstructions in the paper path and remove them if necessary. (It is possible to move the carrier assembly with the power off.) 3. Turn the printer on, load some paper, and press
1,734 questions posted
Usually answered in minutes!
1,353 Questions
1,277 Questions
961 Questions
741 Questions
552 Questions