service 960 memory error- r for my Lexmark C532n printer A 960 RAM MEMORY FAILURE message indicates a failure of the RAM MEMORY that is soldered onto the printer's main controller/system board. If the
960 service memory error - a The error indicates that the system board's on-board memory has failed. This usually requires a service call but you can try to turn off the printer, then turn on after 15
Question about Lexmark C Office Equipment & Supplies
960 service memory error how do I solve the problem on a Lexmark C534? Theprinter memory is failing. RAM soldered on the system board is bad. It would bebest if you contact Lexmark Technical Support ...
960 service memory error-a lexmark c534dn what is wrong how to fix?? Gloria The printer memory is failing. RAM soldered on the system board is bad. It would be best if you contact Lexmark Technical ...
Question about Lexmark C Office Equipment & Supplies
960 c ligth keep blinking red One or both ink cartridge is failed.First remove the cartridges and clean the contacts on the carriage unit using piece of cotton and some alcohol.If problem persist open
Question about Lexmark C Office Equipment & Supplies
...960 service.after turn printer off then on error code indicated immediatly Try this...power off printer. Then if it is a network printer go the to print server and clear all the documents from the ...
Question about Lexmark C Office Equipment & Supplies
...960. changed all the cartridges, did deep clean, alignment etc and photos still coming out wrong - orange tinge to shadow areas, blue eyes washed out.... may be problem with waste ink tank.... When ...
Question about Epson Office Equipment & Supplies
...960 photo printer won't print clearly despite multiple deep cleanings should i replace it, take it to service center ( cost?), or have my techie spouse clean it up somehow? Hello, In Purchasing ...
...case. I see you are in the electronic service business so you may already have one available. If not, take a look at this one: ...
Question about Canon Office Equipment & Supplies
960 or more. Check on a break in the ATR sensor, Replace the ATR sensor XXA8 In ATR control, the detected T/D ratio is upper than its upper limit (13%) 10 times in succession. Check on toner leak from
84 questions posted
Usually answered in minutes!
232 Questions
138 Questions
65 Questions
57 Questions
58 Questions