Canon PIXMA MP810 All-In-One InkJet Printer "apart" Questions

Canon PIXMA210 has jam that I can't get out without taking it apart. How do I take it apart in the least invasive way possible? Thanks RESTART PRINTER OR TRY FOR REMOVING ANY JAM OBJECTS.

...fine) and have put in new cartridges. The lines that go vertical - are very thin, and about a 1mm apart. The horizontal ones are 1mm thick and vary from 1.5mm apart to about 2mm apart!!! Does any ...

... I need to do some printing!! Hi Printers have been greatly simplified inside, so if you can get it apart, it should be fairly easy to see the problem and remove it. The problem you will likely have ...

...still no power on printer. Hi I think you must have pulled a small lead off when you wastaking it apart think you best take it apart again and have a ...

...taking ink cartridge out and putting back in. What else can I do? Have you taken the printer apart? as the issue I had with our spare printer was that the home mechanics around here had taken ...

...It was settled in a room with some humidity can it be the problem? I want to know how to take it apart. In advance thanks for your help. hgasval If you have no indication that there is any power, ...

How to take apart Cannon PIXMA iP3000 to clean the waste absorber How to take apart Cannon PIXMA iP3000 to clean the waste ink absorber?The message says that the waste ink absorber is full. You need ...

...assembely I have been given the job of reassembling an ip2000 printer that the last IT techy took apart. The bottom ink absorber was cleaned and put back but I neet to have some form of manual,

My canon pixma mp160 printer has an error code of "e3". If fixing this requires disassembly (taking apart of printer), please tell me how to take it apart as clearly as you can. Thank you. Try the ...

...it to clean it? Is it really difficult to get to? Please give details as to how to take the machine apart to access it. I just did take this same machine apart. The second ink absorber pad jumped out ...