Question about HP PhotoSmart Office Equipment & Supplies
...tray. 2. Press Setup. 3. Press 5, then press 2. This displays the Tools menu and then selects Clean Printhead. or To clean the ink cartridge contacts 1. Unplug the power cord from the back of the HP ...
...2. Make sure you have letter or A4 unused plain white paper loaded in the input tray. 3. Open the print cartridge door. The print carriage moves to the far right side of the HP All-in-One. 4. Wait ...
Question about HP PhotoSmart Office Equipment & Supplies
...2. Make sure you have letter or A4 unused plain white paper loaded in the input tray. 3. Open the print cartridge door. The print carriage moves to the far right side of the HP All-in-One. 4. Wait ...
...2 through 5 for each of the cartridges. Close the cartridge door, and then try to align the product again. If these steps resolved the issue , there is no need to continue troubleshooting. If the ...
Question about HP PhotoSmart Office Equipment & Supplies
...2. Make sure you have letter or A4 unused plain white paper loaded in the input tray. 3. Open the print cartridge door. The print carriage moves to the far right side of the HP All-in-One. 4. Wait ...
Question about HP PhotoSmart Office Equipment & Supplies
...tray. 2. Load unused, plain white, letter, or A4-sized paper with a brightness level of at least 85 into the tray. NOTE: Look for the brightness level on the paper packaging. Step two: Align the ...
...2. Make sure you have letter or A4 unused plain white paper loaded in the input tray. 3. Open the print cartridge door. The print carriage moves to the far right side of the HP All-in-One. 4. Wait ...
...tray 2 or 3 or 4. refer to this link http://support.lexmark.com/perl/support/support.cgi > Tray Selection Settings for Documents Created in Windows 9x Are Lost in Windows NT/2000 > Paper Is Jamming ...
Question about HP PhotoSmart Office Equipment & Supplies
...tray 2, Plain paper. Tray is empty or media type/ size in tray is incorrect. Ensure media in tray matches printer driver or control panel setting. when you give print command go to print properties ...
Question about HP Office Equipment & Supplies
...tray. 2. Press Setup. 3. Press to highlight Tools, and then press OK. 4. Press to highlight Clean Printhead, and then press OK. The HP All-in-One cleans the print head and prints a page that you can ...
307 questions posted
Usually answered in minutes!
1,869 Questions
1,438 Questions
900 Questions
484 Questions
508 Questions