HP Photosmart C5180 All-In-One InkJet Printer "paper feeds angle" Questions

...menue, or from a hard button on the printer's surface, also make sure that the paper is as far down as you can get it, there might be a certain angle needed to get the paper all of the way

paper feeding in poorly and at an angle which preceded the error msg by a week, resulted in angled prints on the page. http://h30434.www3.hp.com/t5/Other-printing-questions/HP-6180-Will-not-copy-gives

angle tipped slightly to the right. It happened after putting in a new ink cartidge and I scanned in the test page. Scews everything printed. HP photosmart C4480 Remove and replace the cartridge again

paper-feed mechanism. Looking in through either the cartridge door or the output tray, make sure the cartridges have not come loose in the carriage. Push each cartridge inward to securely lock them in

paper won't feed properly- feeds at angle and jams. Printer indicates that it is out of paper. "paper won't feed properly- feeds at angle and jams. Printer indicates that it is out of paper." I am ...

paper feed not straight straight therefore printing an angle Paper feed seems to be slipping so that the paper is printi ned at an angle. it is problem transfer roller clean it then solve your problem

...paper goes on an angle when feeding into the machine. it only feeds into the printer about an inch then goes on an angle and stops ( it is straight going in to the printer) I suggest you get a sheet ...

...angle and is bending The paper is feeding in from the top at an angle and is bending so I have to cancel. I have been using this printer for several years and had no problems before but i don't know ...

paper through on an angle which is causing ti to jam in the right hand side. The paper therefore does not feed through and printing doesn't happen. My guess is that one of the rollers isn't working so

...paper feeds in at an angle and jams the printer I suggest you get a sheet of Card Stock (Heavy paper) and place it in the feed way. Then press the print button applying a slight amount of pressure on ...