Foxconn CPU Cooler Fan CPU Fan "bracket" Questions

how to take out a Retention bracket on a 478 mobo If this is the plastic type, turn over the motherboard and you will see 4 pushpins (white) Use a cocktail stick to poke them through the hole Once ...

CPU Fan needed for AMD Athlon XP-M 2800+ CPU with Socket 754, it has a screw down bracket which screws into the motherboard from the heatsink bracket. Which cpu fan do I need to use? ...

...the engine from the bottom, then remove the right engine mount. Remove the power steering pump bracket bolts, then set the pump and bracket assembly aside, but the power steering lines do not ...

...opened the fan cover and the heat sink clamps fell out. Tried to reconnect and broke mounting bracket. Have ordered bracket but do I still need to epoxy heat sink before clamping? DO NOT use ...

which is better on a xigmatek loki 963 push or pull? Push is always best for CPU coolers.

where can I get snapping bolts for intel cpu fan lga775 Those snap bolts are evil. Check out newegg. They have some retention brackets that should do the trick. ...

...housing" you are talking about could be a few different things. You could be talking about the bracket, which I am suspecting. You can get it easily off eBay or

The bracket clip that holds the fan down broke. Is there a fix or do I buy a new fan? If you are innovative enough one can improvise by simply hold the fan to the heat sink with copper wire in case ...

...clean and put back the Sanyo Denki fan. I an open the two plastic clips on the top of the fan bracket, but i do not know how to proceed. Simply open/unlock the clips and pull the heatsink off. ...