Amana 22.6 cu. ft. Side-By-Side Refrigerator with FrontFill Ice and Water "freezer door magnets hold closed" Questions

Freezer door stays ajar after closing the refrigerator door. I'm not sure about the model number, but when I close the frig door and the freezer door pops open, it sometimes doesn't close tightly. ...

Door on right opens as if the magnet is not strong enough. When I close the door on the left the right door opens slightly, as if the magnet was not holding. Model AFD2535DES clean the area where the ...

...freezer door opens sometimes only 10 or 15mm so that the alarm does not detonate. The reverse also happens, ie top door opens when the bottom door is closed with only reasonable force. The seals ...

freezer door will not stay closed when closing refrigerator door The lower hinge on each door may have a door closing cam. It raises the door up ¼ inch when opening and this assist in closing the

freezer door opening when refrigerator door closes The lower hinge on each door may have a door closing cam. It raises the door up ¼ inch when opening and this assist in closing the door. If it?s

...freezer door is the warm air that was introduced into the unit actually shrinking as it rapidly cools. This creates the vacuum which makes the door next to impossible to open until the air pressure ...

freezer has just started popping open when I close top refrigerator and then it is now popping open on its own. Help?? The lower hinge on each door may have a door closing cam. It raises the door up &

...freezer door pops open I have a GE profile refrigerator about 2-3 years new. when i close the frigerator door fast, the freezer door pops open and sometimes it stays open. thus cause the freezer to ...

freezer door will not stay shut is their a replacement for the maginetic strip bottom freezer small The lower hinge on each door may have a door closing cam. It raises the door up ¼ inch when ...

...door like on the freezer. has it disappeared or was it not there to begin with. There is black dust on the floor below the hinge and it looks as though it is grinding when opening and cosing Yes I ...