Question about Kenmore Refrigerators
...ice for the first time, be sure to prime the water supply system. Air in new plumbing lines can result in two or three empty ice maker cycles. Furthermore, if the system is not flushed, the first ice ...
...ice maker quit. Got replacement. New old stock 106626451. Changed water valve solenoid. Freezer is at 6 degrees. Power to the ice maker. Primed ice maker not overfilling. Still won't work. What next? ...
...prime the ice maker Hello friend, thanks for your post! Depending on which style Frigidaire refrigerator you have it is different priming each water line. For a top mount refrigerator you would need ...
Question about Frigidaire Refrigerators
...Ice maker works fine. I put a new filter in and the filter filled with water but still no water from dispensor. you have prime the system air out of the water lines this is easy to do put a glass big ...
ice maker jambed-now no water the icemaker was making noise all day and we found an ice cube jambed. after removing, it no longer works. we have water from the door but not into the ice maker. also it
...the board. By using a standard screw driver the make contact between the black and black with white tracer. This will advance the ice maker into a harvest mode and prime the ice maker. Good ...
...ice maker does not. We tried priming it with water from an outside source, but it only formed a block of ice in the tray and would not flip it into the ice container. Did you by some chance put the ...
...prime the lines. You can remove the white cover of the ice maker. On the module you will see two ports, one marked L and another marked V on the left side. Take a insulated jumper wire and jump these ...
...prime the system. You should then get chilled water around 4 hours later and ice after 12 hours. If there is still no ice you may find that the trace heater on the ice maker water tube is faulty and ...
210 questions posted
Usually answered in minutes!
599 Questions
580 Questions
207 Questions
162 Questions
119 Questions