ASUS A7V8X Motherboard "mean cpu fan detected" Questions

...cpu fan not detected.... i replaced the location of the power fan with the case fan and i receved 512-chasis fan not detected what do you think of that please and do you have a solution for it.... ...

...CPU comes on cos i see the green light, and also the fan rotate. Please what can i do. With regards Paul The monitor is not able to detect any video signal from the motherboard, that means your pc is ...

...CPU fan with blower or a vacuum cleaner. See, if all of the locks of the CPU FAN and the heat-sink are intact. If the fan itself is not rotating, check for the fan cable and if it is OK, then try ...

...CPU 1 short(Beep) System booting is normally 2 short(Beep) CMOS setting error 1 long - 1 short(Beep) DRAM ERROR 1 long - 2 short(Beep) Display card or monitor connected error 1 long - 3 short(Beep) ...

...cpu fan is running without pushing the cabinet power "ON" switch, and the computer is not working, and also motherboard led light is not blowing. Please guide me with your great exprience. Awaiting ...

...CPU and blower fan for working good, also capacitor parts for leakages.Three long beeps means keyboard error some key press stock up or modules parts defective.Repeated long beeps means memory not ...

...CPU 1 short(Beep) System booting is normally 2 short(Beep) CMOS setting error 1 long - 1 short(Beep) DRAM ERROR 1 long - 2 short(Beep) Display card or monitor connected error 1 long - 3 short(Beep) ...

...CPU fan is clean 3) check the Heat Sink has all vanes etc clear of fluff and dust 4) check the Heat sink has a thin and I mean thin layer of heat sink paste on it 5) Vacuum out all dust from case Do ...

FAN is fine, MEMORY is fine, HARD DRIVE is fine, CONNECTOR is fine. Before it hang, the system boot abnormally, turn on, turn off, and turn on again but not reach OS, it just freeze at BIOS POST, next

...cpu,s fan working. Hi, The computer was working fine till suddenly it powered off abruptly.. I don't know how it got powered off. But after that my machine does not POST. I see nothing appearing on ...